SureFloor HS Epoxy
From: $196.00 Inc GST
SureFloor HS Epoxy is an extremely high solids solids (92%), two-pack epoxy. It is designed for applications demanding high structural integrity. A multi-purpose epoxy floor coating for roll on coats or seamless epoxy flake flooring base coats, exhibits excellent adhesion and high structural strengths.
SureFloor‚HS Epoxy has exceptional resistance to a wide variety of chemical spillage and fumes makes epoxy coatings ideal for use in heavy industry or marine environments, commercial and domestic projects. Con-Treat’s range of SureFloor Epoxy Floor Coatings are available in a variety of Australian standard colours and are blended in the batching process for even colour distribution, not as tint packs (which give colour variation).
Features:
- Easy to roll
- Highly chemical resistant
- Excellent adhesion
- High build application
- Ideal epoxy flake base coat
*Hints:
- To extend working times, get the epoxy out of the mixing bucket as quickly as possible by putting a “ribbon” on the floor straight away.
- Never mix a new batch of epoxy floor coating in the previous bucket as this will dramatically reduce the pot life. Use fresh buckets with each batch.
- If top coating with polyurethane, it is always advisable to do a 50/50 Methylated Spirits/Water wash prior to sanding. This will remove the possibility of any amine residue sitting on the surface, especially during low temperature applications.
- Only mix enough epoxy to work with for about 10-15 mins at a time.
- Additional Info/Ideal For
- Video
- Colour Chart
- Ideal For
- Coverage Rate
- Information Guides
- FAQs
- Specifications
- Application Accessories
Typical Applications:
- Pulp and paper mills
- Hospitality
- Refineries
- Water storage tanks
- Food processing plants
- Domestic projects
- Commercial projects
- Seamless flake flooring
Download the technical documents below:
Yes, however due to timber expanding & contracting etc, it is not advisable. If it is done, then sand and prime with SurePrime 1st and ensure the timber is dry with no movement.
Yes, etch with a grinder or wire brush 1st and then prime with a “zinc” rich metal primer.
No, SureFloor HS Epoxy is not UV stable. If it receives a lot of UV light, then it is advisable to apply 2 x Fortis 519 Polyurethane top coats. Allow the epoxy to dry for a minimum of 20 hours and then wash with a 50/50 Methylated Spirits/Water solution to remove any amine residue. Mop the epoxy with clean water and allow to dry. Then sand with a 220# sandscreen and do another light wash with either xylene or acetone. Apply Fortis 519 as per instructions.
You may also like…
Product Enquiry Form
Have a question or need a quote about this product? Tell us a few details and we’ll get back to you with the right advice and pricing. Prefer to talk? Call 1300 044 625.
