SureFloor High Solids Plus
$368.00 Inc GST
SUREFLOOR HIGH SOLIDS PLUS is an extremely tough workhorse epoxy with excellent chemical resistance. A two-component, solid colour, high solids, silicone free, low viscosity, self-priming, glossy epoxy resin available in a wide range of colours. Typically installed as a seamless, high build, smooth coating for light to medium duty traffic areas. This general service epoxy coating demonstrates good mechanical and chemical resistance
Typical Applications
- Protection & enhancement of ground concrete
- Ideal Base Coat for Epoxy Flake Flooring, Epoxy Quartz Flooring, and Metallic Epoxy Flooring Systems
Features:
- Good chemical resistance
- Low viscosity
- Nice gloss appearance
- Does not support bacteria growth
- Easy to clean and maintain.
- Durable, impermeable and seamless
- Neutral odour
- Excellent adhesion
- Good mechanical resistance
- Cost effective
*Hints:
- After mixing, allow a 3-minute induction period then mix again for approximately 15 seconds.
- To extend working times, get the epoxy out of the mixing bucket as quickly as possible by pouring the entire bucket in a thin row on the floor and begin spreading.
- Never mix a new batch of epoxy floor coating in the previous bucket as this will dramatically reduce the pot life. Use fresh buckets with each batch.
- Only mix enough epoxy to work with for about 15-20 mins at a time.
- Additional Info/Ideal For
- Video
- Colour Chart
- Ideal For
- Coverage Rate
- Information Guides
- FAQs
- Specifications
- Application Accessories
Download the technical documents below:
SureFloor High Solids Plus will be dry to touch @ 21°C in about 6 hours. Light foot traffic is ok after 24 hours, but vehicle traffic should wait for at least 3 days. The full cure time is 7 days.
15 – 30 minutes, depending on relative humidity and temperature.
SureFloor High Solids Plus can be re-coated when it can be walked on without leaving any impressions. Generally around 12-18 hours, weather dependent.
No, if re-coating within a 12-18 hour period. If left for longer than this, then it will require sanding with a 220# sandpaper or screenback.
You may also like…
Product Enquiry Form
Have a question or need a quote about this product? Tell us a few details and we’ll get back to you with the right advice and pricing. Prefer to talk? Call 1300 044 625.
