Contreat Logo
  We Deliver Australia Wide
Call 1300 044 625
Polyaspartic Floor Coating
Polyaspartic Floor Coating Hamilton
Polyaspartic Coating Hamilton
Polyaspartic Coating
Polyaspartic Floor Coating - Image 5
polyaspartic-9-contreat
polyaspartic-7-contreat
polyaspartic-10-contreat
polyaspartic-8-contreat
polyaspartic-12-contreat
Polyaspartic Floor Coating - Image 11
polyaspartic-16-contreat
polyaspartic-15-contreat
polyaspartic-14-contreat
polyaspartic-5-contreat
polyaspartic-2-contreat
polyaspartic-1-contreat
Polyaspartic Floor Coating - Image 18
polyaspartic-3-contreat
X43-Beige-Contreat
Black-Contreat
N44-Bridge-Grey-Contreat
Clear-Contreat
N35-Light-Grey-Contreat
White-Contreat
Need A Trade Account?

Polyaspartic Floor Coating

From: $451.00 Inc GST

Instant TREAT is a two component, rapid curing, polyaspartic floor coating system. A UV stable coating that is durable and decorative for all residential, commercial and industrial flooring. It is the ultimate protection for garages, decks, walkways, commercial kitchens and more. An aliphatic polyaspartic that is colour stable, allowing it to take UV exposure without the colour shift seen with other coating systems such as epoxy.

Instant TREAT Polyaspartic is a 1:1 mix ratio system that allows sufficient pot life to be rolled, brushed or sprayed with Con-Treats application equipment. It can be used in conjunction with either decorative flake chips, with quartz granules or on it’s own in a variety of colours with any desired slip resistance. It can also be used clear as a durable top coat.

Con-Treat’s Instant TREAT creates a durable, seamless polyaspartic floor coating which conforms to any shape and size.

“Our client required the concrete area around the pool, footpaths and steps to resemble the beach, with a finish that is extremely durable and hard-wearing to survive the tropical climate of Hamilton Island. We were able to achieve the look our client was after by using Instant TREAT Polyaspartic and also provide a finish that is slip resistant, waterproof and easy to clean.” Shaun Thompson

Features:Australian Made

  • Available in = 10ltr & 40ltr kits
  • Low in VOCs
  • Install Time = One day
  • Return to service = Next day
  • High build thickness in 1 application = Yes
  • Odour = Extremely low
  • Application temperature = As low as 0C
  • Elongation, expands with surface / joint = Yes
  • Colour stability = UV stable
  • Gloss retention = Very good
  • Chemical resistance = Excellent

Instant TREAT is a 100% solids, two component, rapid curing, polyaspartic floor coating system. A UV stable coating that is durable and decorative for all residential, commercial and industrial flooring. It is the ultimate protection for garages, decks, walkways, commercial kitchens and more. An aliphatic polyaspartic that is colour stable, allowing it to take UV exposure without the colour shift seen with other coating systems such as epoxy.

Instant TREAT Polyaspartic is a 1:1 mix ratio system that allows sufficient pot life to be rolled, brushed or sprayed with Con-Treats application equipment. It can be used in conjunction with either decorative flake chips, with quartz granules or on it’s own in a variety of colours with any desired slip resistance. Con-Treat’s Instant TREAT creates a durable, seamless polyaspartic floor coating which conforms to any shape and size.

“Our client required the concrete area around the pool, footpaths and steps to resemble the beach, with a finish that is extremely durable and hard-wearing to survive the tropical climate of Hamilton Island. We were able to achieve the look our client was after by using Instant Floor Polyaspartic and also provide a finish that is slip resistant, waterproof and easy to clean.” Shaun Thompson

Typical Applications

    • Aircraft Hangers
    • Decking & Patios
    • Garage Floors
    • Laboratories
    • Factory Floors
    • Commercial Kitchens & Bars
    • Entrance / Lobby / Show Rooms
    • Fast Food Shops
    • Hospital & Health Facilities

Hint:

    • Never mix more than 6ltrs at a time (3ltr A & 3ltr B).
    • Always mix each batch in a fresh bucket.
    • Mix slowly & thoroughly for 2 mins.
    • Do not leave the product in the bucket when rolling, apply ribbons on the floor.
    • It is very important to have adequate air flow to aid in curing.
    • Always keep wet edge.
    • Ideal roller is an 8mm micro-fibre.

Clear
N61 Black
White
Beige
N35 Light Grey
N44 Bridge Grey

Download the technical documents below:

Instant-TREAT Polyaspartic Part A SDS (PDF • 195.3 KB)
Instant-TREAT TDS (PDF • 1.3 MB)
Instant-TREAT Polyaspartic Pigment SDS (PDF • 975.8 KB)

Is Instant TREAT UV stable?

Yes, Instant TREAT is a true aliphatic that will not yellow.

Does Instant TREAT contain UV blockers?

Yes, Instant TREAT is the only Polyaspartic Coating on the market that contains UV blockers to help prevent non uv stable products underneath from yellowing.

Can Instant TREAT be thinned?

Yes, Xylene can be added at 5%-10%, however it will decrease the working time slightly..

Can more than one coat be applied in a day?

Yes, Instant TREAT can be re-coated within 1-12 hours.

Do you need to sand in-between coats?

If a subsequent coat is applied within 8 hours of the initial coat then no sanding is required.

If I miss the maximum 8 hour re-coat window, what is the process for re-coating?

Allow to dry for 12-18 hours, sand using a 180 grit sand paper, clean and re-coat. Re-coating of polyaspartic is not advisable after 4-7 days (full cure) of the initial installation, however If you must re-coat after 7 days, sand with 80 grit sand paper and wipe the floor with acetone prior to re-coating.

You may also like…

Need More Information or Have Questions?

Product Enquiry Form

Have a question or need a quote about this product?
Tell us a few details and we’ll get back to you with the right advice and pricing.
Prefer to talk? Call 1300 044 625.

Name(Required)
Please let us know what's on your mind. Have a question about this product? Ask away.

Close
Q

Related products

0
Call Now Button