Fortis 526 Gloss & Satin
$299.00 Inc GST
Fortis 526 Polyurethane is a water based, two pack, aliphatic polyurethane. It is non toxic, contains no harmful solvents and has no noxious odours. Fortis 526 Polyurethane is highly suitable when a heavy duty, long wearing gloss or satin finish coating is required for Concrete, Timber or Cork flooring. Highly scratch and chemical resistant with a medium solids content. Fortis 526 will not darken the substrate and will enhance exposed stone in honed concrete. It is easy to apply, washes up in water and is environmentally friendly. Fortis 526 will achieve a P3 Dry Slip Test rating when applied @ 2 coats on honed concrete, however individual slip testing needs to be carried out on each project to comply to Australian Standards.
*It is always advisable to use Fortis 520 Eco Primer as the 1st coat before applying the 526.
Available in: 5ltr Gloss or Satin
Advantages
- Easy application
- Available in Gloss or Satin Finish
- Indoor / Outdoor Undercover
- No bleaching of timber
- Excellent chemical resistance
- Durable & scratch resistant
- A finish very similar to solvent based polyurethane
- Non yellowing, UV stable
- No solvents, No odour
- Excellent adhesion to Concrete & Timber
- Higher coat build than any other water based finish
- Additional Info/Ideal For
- Video
- Colour Chart
- Ideal For
- Coverage Rate
- Information Guides
- FAQs
- Specifications
- Accessories
Hint:
- Always use Fortis 520 Primer as the 1st coat/primer.
- When applying a satin finish, always use a gloss as your 1st coat. The satin should always be the final coat only.
- Once mixed, pot life is approx 30 mins. Apply to substrate as soon as possible.
- Being a 2 pack, it generates heat, so the longer it is in the pot, the quicker it goes off.
Download the technical documents below:
The concrete should be a minimum age of 28 days prior to applying Fortis 520 or Fortis 526.
In general, as soon as it is walkable, however in colder weather conditions allow up to 12 hours between coats.
Part A must be mixed 1st, then slowly pour part B into a vortex while still mixing part A.
Yes, however the leveling compound must contain at least 15% silica and the 1st coat must be Fortis 520.
Approx 4.5:1 (Gloss) or 3.3:1 (Satin)
Product Enquiry Form
Have a question or need a quote about this product? Tell us a few details and we’ll get back to you with the right advice and pricing. Prefer to talk? Call 1300 044 625.
